Latest EMC News, White Papers & Products

13 June, 2023 Newsletter - EMC Directory

Top stories this week. View it in your browser


Weekly Edition
Date: 13 June, 2023

Sponsored by Information Warfare Symposium

Featured Products this Week

200 V Hermetically-Sealed Dual Line Common Mode Panel Mount Filter

EMC / EMI Filter from Spectrum Control

The Dual Line EMI Filter from Spectrum Control is a Dual Line Common Mode Panel Mount Filter. It provides an EMI filtering of common mode noise from 30 kHz to 1 GHz and differential mode noise filtering from 30 kHz to 10 MHz. This filter employs a common mode choke, line to ground and line to line capacitance to enable attenuation of common and differential mode voltages (noise) from both lines on inputs and outputs of AC or DC systems.

Download Datasheet Product Details

GTEM Test Cell For Emission and Immunity Testing from DC to 20 GHz

TEM / GTEM Cell from ETS-Lindgren

The 5402 GTEM! Cells from ETS-Lindgren are Test Cells that operate from DC to 20 GHz. They enable users to perform radiated emissions and radiated immunity tests in less time than either an OATS or in a chamber. A typical radiated emissions test (10,000-point scan) can be completed in 15 minutes or less, while a typical radiated immunity test can usually be completed in half the normal time.

Download Datasheet Product Details

Battery-Operated CISPR-Compliant FFT EMI Receiver from 10 Hz to 3 GHz

EMI Receiver from Narda Safety Test Solutions

The ER9000 from Narda Safety Test Solutions is an EMI Receiver that operates from 10 Hz to 3 GHz. It is designed for conducted and radiated EMC measurements and is compliant with industry standards such as CISPR 16-1-1, MIL-STD-461, ANSI C63.2, and FCC. This receiver combines the functionalities of an EMI test receiver and a spectrum analyzer.

Download Datasheet Product Details

4 kW TWT Pulsed Power Amplifier from 1 to 2 GHz

EMC Power Amplifiers from Advanced Amplifiers

The AA-12G-4KW-PT from Advanced Amplifiers is a TWT Power Amplifier that operates from 1 to 2 GHz. It delivers a peak pulsed output power of 4 kW with a gain of 40 dB and a duty cycle of 6%. This amplifier has spurious emissions of better than -55 dBc for frequencies up to 250 Hz and -60 dBc for frequencies above 250 Hz.

Download Datasheet Product Details

Sponsored by Information Warfare Symposium

Low-Noise Signal Generator from 8 kHz to 20 GHz

EMI Signal Generator from Rohde & Schwarz

The R&S SMA100B from Rohde & Schwarz is an EMI Signal Generator that operates from 8 kHz to 20 GHz. It can generate microwave signals with extremely low close-in SSB phase noise, enabling radar systems to detect even very slow objects. For testing analog-to-digital converters (ADC), the R&S®SMA100B produces signals with extremely low wideband noise.

Download Datasheet Product Details

Log Periodic Dipole Antenna from 800 MHz to 3 GHz

EMC Antenna from TDK RF SOLUTIONS INC.

The LPDA-8003 from TDK RF SOLUTIONS is a Log Periodic Dipole EMC Antenna that operates from 800 MHz to 3 GHz. The antenna's patent-pending balun design provides improved pattern symmetry and a low VSWR of 2.00:1. It is well suited for dual-band communication testing where the antenna must not interfere with the measurement environment.

Download Datasheet Product Details

About EMC Directory

EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.

To unsubscribe please click here

[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]

Newsletters

Signup for Weekly Updates

Other Newsletters

Latest EMC News, White Papers & Products